By Grace McGrath
DescriptionMUD FLAP CHECKER WITH VESPA LOGO CUPPINI Black and White checkers Rear Mud Flap will fit almost Vespa scooter. Measures 8 inches long and 9 inches wide. Holes are 145mm apart (5 3/4 inches), which is close to the license plate holes so you should be able to figure out some way to fit to any scooter. Made in Italy by Cuppini.
FRONT FENDER MUD FLAP EXTENDER VESPA SPRINT PRIMAVERA 50-150This will extend your front fender about 6" longer on your Vespa Sprint or Primavera. The most common corrosion problems with the Vespa models is the damaged caused to the paintwork under the frame from rocks and debris. These will leave nicks in the paint that will let the corrosion start on the metal under body of the chassis. This is due to water, salt, ice, and gravel that is propelled against it by the front wheel during riding. This front splash guard is attached to the front fender, holes are require to drilling through the plastic of the original front fender for mounting.
Product descriptionThe MOD styling of any scooter is not complete without a set of mud-flaps . We have them available with red, blue and black striping (with or without the Vespa logo), black and white chequered and in a classic look. To successfully mount these to the rear of your scooter, holes must be drilled into the lower edge of the number plate holder to accommodate either rivets or screws. Holes are also necessary for attachment of the front mud flap to the rear of the front mudguard, effectively extending the unit itself for a more effective protection of the vulnerable underside of your scooters frame. Conclusion: MOD accessory with both form and function!
FRONT FENDER MUD FLAP EXTENDER VESPA GT GTS SUPER HPE 2005-2022This will extend your front fender about 6 3/4" longer on your Vespa GTSThe most common corrosion problems with the Vespa models is the damaged caused to the paint work under the frame from rocks and debris. For mounting there are a set of rust-free plastic rivets which are incliduded. TECH TIP - Easy install, but you will have to drill 4 5/32 rivet holes to fit this mud flap. Double stick tape and plastic rivets are included. Does NOT fit Vespa GTS models 2023 and newer.
OP GTS_Tom Member Vespa GTS 125 Super Joined:Posts: 29Location: Stoke-on-trentquote hi guys,This is really random but ive had an idea for my vespa, Id love it if I could have a custom mudflap with the adidas originals logo onit. however, I've got no idea how id go about doing this. does anybody know of any companies that may be able to help me out or am I best finding the rubber and doing it myself. Just thought it would make it abit different from the others that you see at shows etc.
