By Harry Smith
What do we need to build our diagnose tool:- pc/laptop with Windows XP and higher- VAG KKL cable (preferred with FTDI chip)- Fiat OBD cable- MultimeterTo start with the pc/laptop. About the cables: To start with the VAG KKL cable, I have bought two of them and only one is working fine. NOTE: some cables does have OBD pin 15 connected to the L-line (FIAT pin 1) and OBD pin 4 and 5 bridged (GND). Check with the following program which COM port is dedicated to the VAG KKL cable. I also imported the ECU file in the mapping program TunerPro (Mapping is to complex for me, so I stopped further testing.
Post by New2Scoots ยป Sun Jul 30, 2017 1:10 amI searched online & found out how to reset the ICU on a Buddy 170i (not in the manual) but have one question about step 3. How far to the right does the key go? I'm guessing one click but there are 3 positions; Lock, Push, Off. 4) Wait ten whole seconds5) Release the throttle6) Turn key to the left again7) Start bike upAlso I'm assuming this should be done with the engine warm, or does that matter? 2014 Genuine Buddy 170i2014 Honda NC700XAvatar: "UNABLE TO UPLOAD FILE"
This video shows how to reset the service/maintenance icon for the Vespa GTS 300 Supertech, Primavera Sport, and Sprint Sport. Skip to reset process: https://youtu.be/95NbobPq5W8?t=213Text version of reset process:1. Use mode button to get to the battery status3. Press and hold the mode button for half a second4. Press and hold the mode button for 10 seconds but not more than 15 seconds6.
